10KV Insulation Diagnostic Tester

10K-PI is an insulation diagnostic tester with a test voltage range of up to 10KV. It is designed and developed indigenously at our state-of-the-art R&D laboratory to conduct automatic insulation tests on high voltage equipment like transformers, cables, bushings, switchgear & rotating machines.

Download Brochure

    10K-PI is an insulation diagnostic tester with a test voltage range of up to 10KV. It is designed and developed indigenously at our state-of-the-art R&D laboratory to conduct automatic insulation tests on high voltage equipment like transformers, cables, bushings, switchgear & rotating machines. 10K-PI is a technologically advanced microprocessor based instrument that provides high speed data sampling to give correct readings even in harsh electrical conditions. It has a wide insulation resistance range of up to 20T ohm.

    Model 10K-PI is a mains and battery operated, portable & compact insulation tester for outdoor applications. The battery backup of 6 hours makes it suitable for field operations. IP54 rating keeps 10K-PI safe from water & dust ingress. It complies with CAT IV 600V for safe operation. The instruments and their accessories are certified as per the relevant IS/IEC standards.

    The information displayed on the large LCD backlight includes insulation resistance, leakage current, capacitance, battery status & timer. It has three programmable timers provided to conduct various tests like Polarization Index (PI), Dielectric Absorption Ratio (DAR), Dielectric Discharge (DD), Step Voltage (SV), & Breakdown Voltage (BDV) test. 10K-PI can store up to 1000 test results*. It has a PC interface with USB & RS232 for data transfer. The PC software is used for report generation & data trends analysis. It helps to keep a record of capital equipment. The instrument has an automatic discharge facility for capacitive load discharging at the end of the test.

    Application 

    The Insulation Resistance test is an essential test that helps to verify the condition of electrical insulation. The insulation resistance quality of an electrical system degrades with time, and with environmental conditions such as temperature, humidity, moisture, and dust particles. This instrument is designed for routine insulation resistance testing and diagnostic testing like PI, DD, DAR & SV of high voltage electrical apparatus Including transformers, generators, motors, cables, bushings, LA’s, switchgear, etc., and is temperature independent. The data trends can reveal vital information about the insulation quality and enable the user to make informed decisions. 

    Features 

    • Available IR testing with multiple diagnostic modes – PI, DAR, DD, Step Voltage, BDV & Burn test
    • Programmable test voltage from 500V-10KV 
    • Insulation resistance range from 1K ohm  to 20T ohm
    • Three programmable timers
    • Programmable break down current settings
    • Mains & battery operation
    • Internal data storage up to 1000 tests*
    • Galvanic isolated RS 232 & USB port
    • Application software for data trends analysis
    • AC/DC voltage measurement of up to 600V
    • Auto calibration at every start up
    • Burn mode for uninterrupted insulation resistance testing
    • Alarm mode with min-max setting & pass-fail indication 
    • CAT IV 600V, IP54, complies with latest IEC/IS standards 

    Diagnostic Modes: IR, DAR, PI, DD, SV, BDV, Burn

    Test voltage

    Voltage Selectable : 500V,1KV, 2.5KV, 5KV, 7.5KV, 10KV
    Programmable : 500V to 1KV in 10 V steps 
                      1 KV to 10 KV in 25 V steps 
    Voltage Accuracy: ±5%

    Short Circuit Current: 3mA

    Resistance Range:

    Analog Display: 1 K ohm to 10 T ohm
    Digital Display: 1 K ohm  to 20 T ohm
    Accuracy                          : ±5% (Upto 999G ohm )

                                             : ±10% (1T ohm to 10T ohm )

                                             : ±20% (10T ohm to 20T ohm )

    Programmable Timer  : T1,T2 &T3 (0-99Min 59sec)

    Current Measurement 

    Range : 0-3mA  
    Accuracy : ±5% of reading + 5 digits 

    Voltage Measurement 

    Range : 0-600V 
    Accuracy : ±8% of reading + 5 digits 

    Capacitance Measurement 

    Range : 1nF to 50µF
    Accuracy : ±5% of reading + 5 digits 

    Noise Rejection 

    1mA RMS per kV test voltage, not exceeding 5mA 

    Memory 

    Internal data storage up to 1000 tests*

    PC Interface 

    Galvanic isolated USB & RS232 

    Display 

    Large LCD display with a backlight

     

    Our Customers

    Motwane’s customer base is a testament to its ongoing ability to provide reliable, accurate, and long-lasting products, resulting in enduring relationships that are based on mutual satisfaction, loyalty, and trust.

    Contact Us

    Motwane products are highly reliable, built with great quality, and deliver accurate results.  We at BSES Rajdhani Power have been using Motwane products for many years, and continue to do so.

    Shailendra Saxena

    Additional VP Protection BSES Rajdhani Power Ltd.

    Motwane is the oldest and the most trusted company in electrical testing products and solutions also. Motwane is known for reliable and rugged products also, we have procured from them. And our organization has been using these products and have found them satisfactory in performance and services also.

    Mr. Shrikant S Rajurkar

    Director Technical MSETCL

    By using the MOT-WARE software, all equipment testing difficulties have been removed, leading to increased efficiency and happy clients.

    Mr. Milind Thekedar

    Managing Director JBS Enterprises Pvt. Ltd.

    Motwane offers great products! The company fullfills our demands, and supplies reliable products for our Power, Oil & Gas, and other industry projects.  

    Justin Thomas

    FAWAZ Trading & Engineering Services Co. W.L.L.

    MOTWANE is reputed brand since many years & we prefer it for all our International Projects

    Nikunj Mistri

    DGM- India Operations MBH Power Pvt. Ltd.

    We are very satisfied on Motwane’s oil testing products to test electrical properties of Insulation Oil

    Rajshekhar

    LABGULF Sharjah UAE

    TATA Projects regularly uses Motwane’s Test & Measurement equipment for various undertakings. We are satisfied with the product performance!

    Naiyar Kamal Siddiqui

    AGM Projects Tata Projects Ltd.

    MOT-WARE will enable us to go live with data immediately after recording

    Sanjay Sarkar

    Head Projects IBMS SPG, Sterling and Wilson

    Start your journey with Motwane

    It’s easy to switch to Motwane. Our specialists take care of all conceivable requirements your project may have. With over a 100 years of experience in delivering world-class projects, Motware is the right choice.

    Enquire Now

    Book a demo




      Book a demo

      Please fill in your details to connect with us.