Motwane’s RTS Series, also known as Secondary Current Injection kit, is a portable and cost effective solution to test voltage & current based relays. It is designed with highly accurate digital meters for testing protective devices. The MOT-SIK set provides a high burden kit to test electromechanical relays. SIK series can provide up to 200A for CT and MCB testing. The compact & rugged design makes it easy to move it in the relay room.
The secondary current injection test of solid-state units can be performed by a specially designed power supply unit. Secondary injection tests are always done prior to primary injection tests. The purpose of secondary injection testing is to prove that the correct operation of the protection scheme is downstream from the inputs to the protection relay(s). It is done to minimize the risks during the initial testing of the LV side of the equipment. It should be noted that the secondary current injection method only tests the solid-state trip unit logic and components like a relay, miniature breaker, etc.
Over Current Relay
Under Voltage Relays
Earth Fault Relays
Miniature Circuit breaker etc.
|Selectable Current Ranges (O/P current display on % Ammeter)||0-1-5-10A||0-1-5-10-20A||0-1-5-10-25-50A||0-1-5-10-25-50-100A||0-1-5-10-25-50-100-200A|
|O/P DC Voltage||0-250V DC|
|O/P AC Voltage||0-250V AC|
|Voltage Accuracy||±1.5% of full scale reading ±2 digits|
|Current Accuracy||±1.5% of full scale reading ±2 digits|
|Current resolution||1% of the full scale|
|Timer Range||0.0001-9999 seconds, auto-ranging, digital timer|
|Timer Accuracy||±0.05%±2 Counts|
|Duty Cycle||30Min ON, 10Min OFF|
|Mode of Operation||Manual|
|Display||LED Seven Segment Digital Display Meters|
|Indications||Bright LED for Power ON & Test ON|
|Main Supply||230 Vac, 50/60Hz ±10%, 1 Phase|
|Protection and Safety||Fast blow glass fuse
|Operating Temperature||0-55°C, 5-90% RH non condensing|
|Output Current leads||PVC insulated 2.5 sq. mm cu cables 2X1.5mtr lug at both ends||PVC insulated 10 sq. mm cu cable 2X1.5mtr lug at both ends||PVC insulated 16 sq. mm cu cable 2X1.5mtr lug at both ends||PVC insulated 25 sq. mm cu cable 2X1.5mtr lug at both ends||PVC insulated 50 sq. mm cu cable 2X1.5mtr lug at both ends|
*We also provide Customized RTS as per requirements
Motwane’s customer base is a testament to its ongoing ability to provide reliable, accurate, and long-lasting products, resulting in enduring relationships that are based on mutual satisfaction, loyalty, and trust.Contact Us
Motwane products are highly reliable, built with great quality, and deliver accurate results. We at BSES Rajdhani Power have been using Motwane products for many years, and continue to do so.
Motwane is the oldest and the most trusted company in electrical testing products and solutions also. Motwane is known for reliable and rugged products also, we have procured from them. And our organization has been using these products and have found them satisfactory in performance and services also.
By using the MOT-WARE software, all equipment testing difficulties have been removed, leading to increased efficiency and happy clients.
Motwane offers great products! The company fullfills our demands, and supplies reliable products for our Power, Oil & Gas, and other industry projects.
MOTWANE is reputed brand since many years & we prefer it for all our International Projects
We are very satisfied on Motwane’s oil testing products to test electrical properties of Insulation Oil
TATA Projects regularly uses Motwane’s Test & Measurement equipment for various undertakings. We are satisfied with the product performance!
MOT-WARE will enable us to go live with data immediately after recording
It’s easy to switch to Motwane. Our specialists take care of all conceivable requirements your project may have. With over a 100 years of experience in delivering world-class projects, Motware is the right choice.Enquire Now
Book a demo⨯